Galvanized, adjustable steel hinge with weld-on nut, M16,

Galvanized adjustable steel hinge with weld-on nut M20, for gate frame 30 × 30 mm
Product code: D4/19-M20-30x30

The adjustable hinge with weld-on nut M20 provides a practical solution for attaching the frame of a swing gate to its supporting structure. The weld-on nut is welded to the gate's supporting structure, while the gate frame made of a 30 × 30 mm profile is attached to the hinge using a flange. After unscrewing the flange, the frame is placed onto the hinge, and then the flange is screwed back on. The threaded mechanism allows for adjusting the position of the gate leaf after it has been installed. The hinge is made of structural steel with a galvanized surface finish. Parts intended for welding are supplied without surface treatment.

Material
Structural steel.

Surface finish
Galvanization. Parts intended for welding are without surface treatment.

Dimensions and technical parameters
Thread: M20
Intended for gate frame: 30 × 30 mm profile.
Maximum weight of the gate leaf when using 2 hinges: 200 kg, depending on the distance between the swivel washer and the gate frame.

Installation and compatibility
The weld-on nut is welded to the gate's supporting structure. After unscrewing the flange, the gate frame made of a 30 × 30 mm profile is placed onto the hinge, and then the flange is screwed back on. The threaded mechanism allows for adjusting the position of the gate leaf even after it has been installed. When using 2 hinges, the maximum weight of the gate leaf is 200 kg, depending on the distance between the swivel washer and the gate frame.

During installation, it is necessary to consider the gate's construction, the method of attaching the hinges to the supporting structure, and the correct screwing of the flanges to the gate frame.

Advantages
Galvanized finish for corrosion protection.
M20 threaded mechanism for gate position adjustment.
Weld-on nut for attachment to the gate's supporting structure.
Removable flange for attaching the gate frame.
Designed for gate frames with a 30 × 30 mm profile.
Possibility of position adjustment even after the gate is installed.
Maximum weight of the gate leaf 200 kg when using 2 hinges, depending on the distance between the swivel washer and the gate frame.
Parts intended for welding without surface treatment.